Micromaster Hinges are available in two different models MFH 200 and MFH 300. Both models are produced by using the same production methods, identical materials and finishes.

Main Differences

• The MFH 200 is rated for a maximum panel weight of 200kg.

• The MFH 200 is adjusted by using an 11mm open ended spanner (in /out & side to side) and a 4mm Allen Key tool (height).

• The MFH 300 is rated for a maximum panel weight of 300kg.

• The MFH 300 is adjusted by using a 5mm Allen Key tool (in /out & side to side) and a 4mm Allen Key tool (height).

To determine what hinge model will meet your requirements visit the Manfred Frank website.

Castings Specification

Machined Components Specification

Bushes and Bearings Specification

Adjuster Mechanisms Specification

Corrosion Resistance

Micromaster Hinges meet and exceed the requirements of ISO 9227 and BS EN 1670:1998 – Continuous, Neutral Salt Spray Test.

All existing frame mounting and door mounting options can be combined with both models. The trajectory/geometry and movement is identical for both hinge models.